Cristina is a Florida native and Realtor by trade. She enjoys writing about travel, real estate, and several other interesting topics.
Concrete Patio Ideas: Extend Your Patio With Pavers
Many newer homes are sold with an open concrete patio out back, usually only big enough for a small grill, a couple of chairs, and a plant or two. Homeowners who are serious about using their outdoor living area find a typical slab patio is just too small for entertaining or any real kind of enjoyment.
The solution: extend the concrete patio. Pouring additional concrete can get expensive. Permits are required in many areas to pour concrete, and that usually involves hiring a contractor, driving the cost of this project into the thousands. An alternative to pouring more concrete is extending the concrete patio with pavers.
Patio pavers offer homeowners many benefits.
- They are easy to install, so homeowners can make the extension of a concrete patio a weekend do-it-yourself project.
- Pavers come in a large variety of shapes, sizes, colors, and materials, giving homeowners flexibility in creating additional outdoor living space.
- Pavers can be used to create large or small spaces as well as making that space as formal or informal as the homeowner wishes.
- They are also easy and inexpensive to repair.
Below, I describe the 11 steps you need to take to extend your patio with concrete pavers.
1. Plan on Paper
With proper preparation and planning, the DIY paver project becomes easier. Planning is the key. Use graph paper to draw to scale the existing patio, home, and any landscaping that will not be removed. The drawing helps with preparation and ordering materials.
2. Buy Enough Pavers for the Job
The number of pavers needed for the project can be figured easily for a regular-shaped project, such as square or rectangular. Buy enough pavers to cover the square footage of the new patio space plus 5% for cuts at the edges. Irregularly shaped patios will require more cuts, so an extra 10% of that material should be purchased.
3. Map Out the Area
Outline the area where the patio will be. Use string or a garden hose for the outline and stakes to keep the string or hose in place. When laying out the outline, take into account that guards will be used to keep the base and pavers in place, and the base should extend beyond the guards roughly the width of the paver, usually 4” to 6”.
4. Prepare the Slope
One of the most important parts of laying pavers is preparing the slope. All patios should slope away from the house (or, in this case, away from the existing patio) for proper drainage and to prevent rain from pooling.
The slope should be at least 1/8” over one foot, so if the patio is 8’ long, the slope should be 1” from the back (the edge that meets the existing patio) to the front. Many paver installers recommend a slope of ¼” for the best drainage.
In most cases, excavating will include removing sod or grass. A sod remover or sod cutter can be rented to make this process easier.
Scroll to Continue
Read More From Dengarden
How much soil you remove will depend on the height of the pavers and whether the soil is wet. (If the spot is very wet, you'll want to dig down further.) The base is typically 5" plus 1.5" for the sand layer, plus the height of the pavers. In very wet soils, the base layer should be up to 12" plus 1.5" for the sand and the height of the pavers.
After excavating, strings can be run from stakes at the existing patio to the front of the new patio area and adjusted to show the slope needed. Running strings crossways as well will ensure the pavers are level across the entire patio.
6. Lay the Base Material
The base is usually a crushed rock material. It should be laid no more than 2” deep at a time and then compacted. For a small area, a hand tamper can be used to compact the material, but for larger areas, use a plate compactor which can be rented for the project.
Compacting the base layer ensures good stability under the pavers. Laying it only 2” at a time ensures that the entire base is compacted properly. The base layer can be watered to help the compacting. Continue adding and compacting base material until the right height for the base has been reached. Be sure to lay the base outside the patio area to ensure the pavers at the edges are stable.
7. Put in Edge Restraints
Edge restraints help hold the pavers in place. They are usually made of wood, metal, or plastic and are installed around the edge of the project with 12” spikes. For irregular-shaped patios, the edging may have to be cut to contour to the curves in the project.
8. Pour a Sand Layer
The sand in a paver patio acts like glue. Use a coarse sand and screed it smooth to the desired height, no more than 1.5” thick. A small project can be screeded with a 2”x4” but for large projects, the sand should be laid and screeded in 50 to 100 square foot sections, finishing one section before moving on to the next. Aluminum pipes can be laid down to measure out the sections, then lifted off as needed, and the groove left behind should also be filled in and screeded.
9. Lay the Pavers
The project is almost finished when it’s time to lay the pavers. After all the hard work of prepping and laying the base, laying the pavers is easy. Begin laying them at a 90-degree corner, preferably adjacent to the existing patio.
Work from the existing patio out, laying the pavers in straight lines in the sand. They should be laid directly into the sand where they will sit, not slid into place, as this will displace the sand beneath and should be 1/8” apart.
Stand on the pavers already laid to continue the work rather than on the sand. From time to time, check that the pavers are straight and level using a string as a measure.
Lay all of the whole pavers first, then come back to make the necessary cuts at the edges. Pavers can be cut using a masonry saw. Be sure to use safety goggles and follow all of the manufacturer’s safety guidelines.
10. Tamp It All Down
After all the pavers are laid, use the plate compactor to tamp the pavers into the sand. Finish the project by sweeping a fine sand into the joints between pavers. This will lock the pavers into place. Sand will probably need to be swept into the joints a few times as it will settle with use and rain.
11. Seal It
To ensure lower maintenance, the pavers can be sealed. A sealer will protect the pavers against moisture, keep the sand between the joints in place and help prevent weed growth.
Now that the patio is finished, it’s time to enjoy. Invite over friends and family, have a barbecue, and enjoy the products of a job well done. A paver patio should last 10–20 years and offer lots of enjoyment.
This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.
© 2010 Cristina Vanthul
Becky on January 10, 2015:
Hello Mark,First off, thank you for the great website! It is very iorifmatnve and helpful to me as a fellow DIYer.I'm in the process of redoing my driveway as it is shot beyond repair and I love what you did with yours. I'm planning on doing the same with mine and following your advice of curbing first and then having the contractor come in with the asphalt. I'd like to lay the Belgian block edging on an angle as you did but for some reason I can't find any information on laying Belgian block in this manner except for your website. I know it's not as popular as vertical installation but it's weird how nobody else has posted details on the angled installation.My question for you is related to the depth of the concrete base and manner of laying the Belgian block on an angle into the concrete. I've seen how the vertical installation calls for sinking the Belgian block a few inches into a concrete base and then troweling some concrete on the outside of the curbing at a 45 degree angle to the same height as the asphalt on the other side in order to hold up the Belgian block. However, laying the block on a 30 degree angle is a different story and I'm not sure how deep to make the concrete base for that and whether to sink the entire block into the concrete so that the outside edge will have concrete coming up the side or just laying it onto the concrete base without sinking the outer edge into the concrete. Also, is the trench dug with a flat bottom or is the bottom of the trench angled at the same angle as the block is to be laid?Thanks in advance for your time and help!Regards,Tom
Kapri on December 29, 2014:
That really capuerts the spirit of it. Thanks for posting.
Gosia on December 28, 2014:
Hi MarkThe Bradford Pear would definitely not be sutbliae for our little property I don't know if you could get it in Australia anyway. They sound a little bit like our beautiful Jacaranda trees that bloom in late October/November depending on the weather. They come out in a bloom of purple and then leave a beautiful carpet. They look spectacular where they have been planted in parks. Do you have Leopard Trees in New Jersey? They are my absolute favourite tree. They have a magnificent green canopy and a trunk that is largely white with grey streak, but oh the mess all year around! It is either dropping pods, flowers or leaves so really only sutbliae for a large yard where it doesn't matter about the droppings.Pity you can't do some articles on Aussie landscaping :)jan recently posted..
Cristina Vanthul (author) from Florida on August 05, 2010:
Please let me know how it turns out, nifty@50.
nifty@50 on August 03, 2010:
I've got this book marked for my honey do list! Thanks for sharing!
Cristina Vanthul (author) from Florida on May 24, 2010:
Oh, please do! I'd love to see how your paver patio turns out and how it looks with the postage stamp concrete ones. Looking forward to it!
rockthrower on May 23, 2010:
I enjoyed the hub. My patio was about the size of a postage stamp. I ran across a great Patio Furniture Clearance and of course I bought more than would fit on my patio. Now that I have an idea of what to do, I am going to recruit my brothers to build the beautiful Circular Paver Patio. Thanks cvanthul, I can't wait to post pictures.
Pavers Over Concrete on May 15, 2010:
Nice one with the hub. Having close friends or family member helping with job is always helpful. It makes the job a lot more fun - and is a great way of bonding (good ole bromance!)
Cristina Vanthul (author) from Florida on April 22, 2010:
Thanks, IFD! Glad you enjoyed.
IFD1253 from Indianapolis, IN on April 21, 2010:
Great Hub! Full of great ideas and plans for executing them!
So before we put the stones down we're going to put this stone dust in and all this is is crushed
Concrete and gravel are the cheapest materials you can use to extend your patio. Concrete typically costs around $5 per bag. One 60-pound bag makes enough concrete for 1.5 square feet of a 4-inch-deep patio.
One way to increase the size of your patio is to have a concrete contractor add concrete to your existing patio. You might choose the option to extend your patio with concrete if: you're looking for something more permanent and you want the durability and longevity of concrete.
Fortunately, you can put pavers directly over existing concrete. It's a common practice and a great way to upgrade your concrete surfaces. While mortar is preferable when installing pavers, it's possible to put in the pavers without mortar (although it puts you at risk of drainage issues and cracking).
While it may seem like a good idea to install pavers right to the concrete, it may not be the best way to go about it. Pavers are great because of their flexibility. They are able to move and shift with the ground as it heats and cools. Concrete, on the other hand, can crack under the constant shifting.